Turn on your device by pressing the button once. You will now see the time to be adjusted. Press and hold the button for 3 seconds to start the adjustment process — first the "hour" indicator will begin to flash. Use the button to set the hour, then press the button again for 3 seconds to switch to the "minutes." Repeat this process to set the minutes, month, day and year. You can also choose between a 12-hour or 24-hour clock format.

After completing all settings, do not press any more buttons for 8 seconds; the device will save the data and return to standby mode. Your device is now fully set up and ready to use.

• Alarm Set: To set the alarm, press the button twice to display the first alarm group. If "A1 OF" is displayed, it means the alarm is off by default. To turn it on, press and hold the button for 3 seconds. The hour begins to flash — press the button to set the hour. Once the hour is set, press and hold the button again to switch to the minutes. After setting the minutes, press and hold the button again for 3 seconds to save the alarm. The alarm is now activated.

To set additional alarms, press the button three or four times to access the other alarm groups and follow the same procedure.

• Alarm Off: To turn the alarm off, navigate to the set alarm by pressing the button the appropriate number of times. Once the alarm is displayed, press and hold the button for 3 seconds, then press the button again until "A1 OF" appears, then press and hold the button for 3 seconds and the alarm is turned off again.

To check the battery level of your device, press and hold the button for 3 seconds while the device is in idle mode. It will then display the percentage.

We understand how important it is to wake up on time. If you're not waking up with the standard version, don't worry. Try this:

• Adjust the timing of your 3 alarms: The standard version has 3 alarms you can set. To help adapt to your body, we recommend starting by setting all three alarms with a 15-minute gap between them. Then, gradually reduce the gap to 10, 5, and eventually 3 minutes.
• Experiment with wearing positions: Some people respond better to vibration in different areas of the body, such as wearing your Royal Alarm around your ankle instead of your wrist. Many customers find this alone significantly improves wake-up reliability.

The vibration lasts for 2 minutes and then stops automatically.

There is no traditional snooze button. However, you can create a snooze effect by setting multiple alarms:

• Standard version: up to 3 alarms
• Pro version: up to 5 alarms

This is normal behavior. The display cycles through three types of information:

1. The time
2. The date
3. The day of the week (for example, 5 means Friday)

Yes, but this needs to be done manually. The alarm will not automatically turn itself back on the next day.